diff --git a/setup.sh b/setup.sh
index 8f70e14..e11d023 100755
--- a/setup.sh
+++ b/setup.sh
@@ -61,9 +61,34 @@ log 'Configuring Logger ...'
 draw_progress_bar 85
 log 'Copying rules to udev ...'
 sudo cp -r src/rules/* /usr/lib/udev/rules.d
+sudo cp src/rules/90-usb-storage.rules /etc/udev/rules.d
+sudo cp src/rules/90-dvd-storage.rules /etc/udev/rules.d
 sudo udevadm control --reload-rules 
 sudo udevadm trigger
 
+draw_progress_bar 90
+sudo cp src/scripts/utils/usb/usb-storage-action /usr/local/bin/
+sudo chmod +x /usr/local/bin/usb-storage-action
+sudo cp src/scripts/utils/usb/addUsbScript.sh /usr/local/bin/
+sudo chmod +x /usr/local/bin/addUsbScript.sh
+sudo cp src/scripts/utils/usb/usb-socket-sono.socket /etc/systemd/system
+sudo cp src/scripts/utils/usb/usb-socket-sono.service /etc/systemd/system
+sudo systemctl enable usb-socket-sono.socket
+sudo systemctl enable usb-socket-sono.service
+sudo systemctl start usb-socket-sono.socket
+sudo systemctl start usb-socket-sono.service
+
+sudo cp src/scripts/utils/dvd/dvd-storage-action /usr/local/bin/
+sudo chmod +x /usr/local/bin/dvd-storage-action
+sudo cp src/scripts/utils/dvd/addDvdScript.sh /usr/local/bin/
+sudo chmod +x /usr/local/bin/addDvdScript.sh
+sudo cp src/scripts/utils/dvd/dvd-socket-sono.socket /etc/systemd/system
+sudo cp src/scripts/utils/dvd/dvd-socket-sono.service /etc/systemd/system
+sudo systemctl enable dvd-socket-sono.socket
+sudo systemctl enable dvd-socket-sono.service
+sudo systemctl start dvd-socket-sono.socket
+sudo systemctl start dvd-socket-sono.service
+
 
 draw_progress_bar 95
 log 'Install PCIE Driver'
diff --git a/src/rules/90-dvd-storage.rules b/src/rules/90-dvd-storage.rules
new file mode 100644
index 0000000..603bafc
--- /dev/null
+++ b/src/rules/90-dvd-storage.rules
@@ -0,0 +1,5 @@
+# Rule for DVD disk insertion
+#ACTION=="change", SUBSYSTEM=="block", KERNEL=="sr[0-9]*", ENV{ID_CDROM_MEDIA}=="1", RUN+="/usr/bin/sudo /usr/local/bin/dvd-storage-action add %E{DEVNAME}"
+# Rule for DVD disk removal
+#ACTION=="change", SUBSYSTEM=="block", KERNEL=="sr[0-9]*", ENV{ID_CDROM_MEDIA}!="1", RUN+="/usr/bin/sudo /usr/local/bin/dvd-storage-action remove %E{DEVNAME}"
+ACTION=="change", SUBSYSTEM=="block", KERNEL=="sr[0-9]*", ENV{ID_CDROM}=="1", RUN+="/usr/bin/sudo /usr/local/bin/dvd-storage-action %E{ACTION} %E{DEVNAME}"
diff --git a/src/rules/90-usb-storage.rules b/src/rules/90-usb-storage.rules
new file mode 100644
index 0000000..9bbf420
--- /dev/null
+++ b/src/rules/90-usb-storage.rules
@@ -0,0 +1,4 @@
+# Rule for USB device connection
+ACTION=="add", SUBSYSTEM=="block", ENV{ID_BUS}=="usb", ENV{ID_FS_USAGE}=="filesystem", RUN+="/usr/bin/sudo /usr/local/bin/usb-storage-action add %E{DEVNAME}"
+# Rule for USB device disconnection
+ACTION=="remove", SUBSYSTEM=="block", ENV{ID_BUS}=="usb", ENV{ID_FS_USAGE}=="filesystem", RUN+="/usr/bin/sudo /usr/local/bin/usb-storage-action remove %E{DEVNAME}"
diff --git a/src/scripts/utils/dvd/addDvdScript.sh b/src/scripts/utils/dvd/addDvdScript.sh
new file mode 100644
index 0000000..9c9bfaa
--- /dev/null
+++ b/src/scripts/utils/dvd/addDvdScript.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+# Your script logic here
+echo "Connection received on Unix socket" >> /var/log/exampleDvd.log
diff --git a/src/scripts/utils/dvd/dvd-socket-sono.service b/src/scripts/utils/dvd/dvd-socket-sono.service
new file mode 100644
index 0000000..b6fd490
--- /dev/null
+++ b/src/scripts/utils/dvd/dvd-socket-sono.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=Example Service for Unix Socket
+After=network.target
+
+[Service]
+ExecStart=/usr/local/bin/addDvdScript.sh
+StandardInput=socket
+
+[Install]
+WantedBy=multi-user.target
diff --git a/src/scripts/utils/dvd/dvd-socket-sono.socket b/src/scripts/utils/dvd/dvd-socket-sono.socket
new file mode 100644
index 0000000..36d96d8
--- /dev/null
+++ b/src/scripts/utils/dvd/dvd-socket-sono.socket
@@ -0,0 +1,9 @@
+[Unit]
+Description=Example Unix Socket
+
+[Socket]
+ListenStream=/tmp/dvd-Sono-Socket.socket
+Accept=false
+
+[Install]
+WantedBy=sockets.target
diff --git a/src/scripts/utils/dvd/dvd-storage-action b/src/scripts/utils/dvd/dvd-storage-action
new file mode 100644
index 0000000..b8f5f8c
--- /dev/null
+++ b/src/scripts/utils/dvd/dvd-storage-action
@@ -0,0 +1,93 @@
+#!/bin/bash
+
+ACTION=$1
+DEVNAME=$2
+
+SOCKET_PATH="/tmp/usb-Sono-Socket.socket"
+LOG_FILE="/tmp/tmpDvd.log"
+DEBOUNCE_FILE="/tmp/dvd_debounce_$(echo $DEVNAME | tr '/' '-')"
+DEBOUNCE_TIME=10  # seconds
+
+current_time=$(date +%s)
+
+# Function to log messages
+log_message() {
+    local message=$1
+    echo $message | socat - UNIX-CONNECT:$SOCKET_PATH
+    echo $message >> $LOG_FILE
+}
+
+# Function to get the size of the DVD
+get_dvd_size() {
+    udisksctl info -b $DEVNAME | grep 'Size:' | awk '{print $2}' | head -n 1
+}
+
+# Function to check for debounce
+check_debounce() {
+    SIZE=$(get_dvd_size)
+    if [SIZE -eq 0]; then
+        ATTEMPTS=3
+        while [ "$SIZE" -eq 0 ] && [ $ATTEMPTS -gt 0 ]; do
+            sleep 2
+            SIZE=$(get_dvd_size)
+            log_message "Debounced: Retried size of $DEVNAME is $SIZE"
+            ATTEMPTS=$((ATTEMPTS - 1))
+        done
+    elif [SIZE -eq 0]; then
+        log_message "exit on: Retried size of $DEVNAME is $SIZE"
+        exit 0
+    fi
+
+    if [ -f "$DEBOUNCE_FILE" ]; then
+        last_run_time=$(cat $DEBOUNCE_FILE)
+        elapsed_time=$((current_time - last_run_time))
+        if [ $elapsed_time -lt $DEBOUNCE_TIME ]; then
+            log_message "Debounced: $ACTION $DEVNAME"
+            exit 0
+        fi
+    fi
+    echo $current_time > $DEBOUNCE_FILE
+}
+
+check_debounce
+
+
+
+if [ "$ACTION" == "change" ]; then
+    # Introduce a delay before checking the device
+    sleep 2  # Wait for 2 seconds before proceeding
+
+    # Check if the device is already mounted
+    MOUNTED=$(lsblk -o MOUNTPOINT -nr $DEVNAME)
+    if [ -z "$MOUNTED" ]; then
+        # Device is not mounted, check if it is a raw DVD
+        SIZE=$(get_dvd_size)
+
+        # Debug output for size
+        log_message "DEBUG: Initial size of $DEVNAME is $SIZE"
+
+        # Retry logic for getting the size
+        ATTEMPTS=3
+        while [ "$SIZE" -eq 0 ] && [ $ATTEMPTS -gt 0 ]; do
+            sleep 2
+            SIZE=$(get_dvd_size)
+            log_message "DEBUG: Retried size of $DEVNAME is $SIZE"
+            ATTEMPTS=$((ATTEMPTS - 1))
+        done
+
+        if [ "$SIZE" -gt 0 ]; then
+            log_message "success insert raw DVD $DEVNAME"
+        else
+            # Proceed to mount the device
+            udisksctl mount -b $DEVNAME
+            if [ $? -eq 0 ]; then
+                log_message "success mount $DEVNAME"
+            else
+                log_message "failed to mount $DEVNAME"
+            fi
+        fi
+    else
+        log_message "$DEVNAME is already mounted at $MOUNTED"
+    fi
+    log_message "success insert $DEVNAME"
+fi
diff --git a/src/scripts/utils/usb/addUsbScript.sh b/src/scripts/utils/usb/addUsbScript.sh
new file mode 100644
index 0000000..489d6be
--- /dev/null
+++ b/src/scripts/utils/usb/addUsbScript.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+# Your script logic here
+echo "Connection received on Unix socket" >> /var/log/example.log
diff --git a/src/scripts/utils/usb/usb-socket-sono.service b/src/scripts/utils/usb/usb-socket-sono.service
new file mode 100644
index 0000000..7726825
--- /dev/null
+++ b/src/scripts/utils/usb/usb-socket-sono.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=Example Service for Unix Socket
+After=network.target
+
+[Service]
+ExecStart=/usr/local/bin/addUsbScript.sh
+StandardInput=socket
+
+[Install]
+WantedBy=multi-user.target
diff --git a/src/scripts/utils/usb/usb-socket-sono.socket b/src/scripts/utils/usb/usb-socket-sono.socket
new file mode 100644
index 0000000..9ae9907
--- /dev/null
+++ b/src/scripts/utils/usb/usb-socket-sono.socket
@@ -0,0 +1,9 @@
+[Unit]
+Description=Example Unix Socket
+
+[Socket]
+ListenStream=/tmp/usb-Sono-Socket.socket
+Accept=false
+
+[Install]
+WantedBy=sockets.target
diff --git a/src/scripts/utils/usb/usb-storage-action b/src/scripts/utils/usb/usb-storage-action
new file mode 100644
index 0000000..c7a03c1
--- /dev/null
+++ b/src/scripts/utils/usb/usb-storage-action
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+# Get the action (add or remove) and the device name from the udev rule
+ACTION=$1
+
+# Get the device name from the udev rule
+DEVICE_NAME=$2
+
+SOCKET_PATH="/tmp/usb-Sono-Socket.socket"
+
+if [ "$ACTION" == "add" ]; then
+    # Mount the device
+    udisksctl mount -b "$DEVICE_NAME"
+
+    # Check if the mount was successful
+    if [ $? -eq 0 ]; then
+        # Write a message to the socket
+        echo "success connect $DEVICE_NAME" | socat - UNIX-CONNECT:$SOCKET_PATH
+	echo "success connect $DEVICE_NAME" >> /tmp/tmp.log
+    else
+        echo "failure connect $DEVICE_NAME" | socat - UNIX-CONNECT:$SOCKET_PATH
+	echo "failure connect $DEVICE_NAME" >> /tmp/tmp.log
+    fi
+elif [ "$ACTION" == "remove" ]; then
+    # Unmount the device
+    udisksctl unmount -b "$DEVICE_NAME"
+
+    # Check if the unmount was successful
+    if [ $? -eq 0 ]; then
+        # Write a message to the socket
+        echo "success disconnect $DEVICE_NAME" | socat - UNIX-CONNECT:$SOCKET_PATH
+	echo "success disconnect $DEVICE_NAME" >> /tmp/tmp.log
+    else
+        echo "failure disconnect $DEVICE_NAME" | socat - UNIX-CONNECT:$SOCKET_PATH
+	echo "failure disconnect $DEVICE_NAME" >> /tmp/tmp.log
+    fi
+fi