A result watcher to get the result once a dialog has finished. More...

#include <message.h>

Inheritance diagram for QtMvvm::MessageResult:

Public Slots
void	discardMessage ()
	Tries to discard the dialog by closing it. More...

void	setResult (QVariant result)
	WRITE accessor for MessageResult::result.

void	setAutoDelete (bool autoDelete)
	WRITE accessor for MessageResult::autoDelete.

Signals
void	dialogDone (QtMvvm::MessageConfig::StandardButton button, QPrivateSignal)
	Is emitted as soon as the dialog was completed. More...

void	autoDeleteChanged (bool autoDelete, QPrivateSignal)
	NOTIFY accessor for MessageResult::autoDelete.

Public Member Functions
bool	hasResult () const
	Checks if the dialog has a result.

QVariant	result () const
	READ accessor for MessageResult::result.

bool	autoDelete () const
	READ accessor for MessageResult::autoDelete.

Presenter-Only methods
The following methods should be used by the presenter only, not from the core
Q_INVOKABLE void	setCloseTarget (QObject *closeObject, const QString &closeMethod)
	Sets an object and a method to be called to close the dialog. More...

Q_INVOKABLE void	setCloseTarget (QObject *closeObject, const QMetaMethod &closeMethod)
	Sets an object and a method to be called to close the dialog. More...

Q_INVOKABLE void	complete (QtMvvm::MessageConfig::StandardButton button)
	Completes the dialog and tells the result that it is finished. More...

Q_INVOKABLE void	complete (QtMvvm::MessageConfig::StandardButton button, const QVariant &result)
	Completes the dialog and tells the result that it is finished. More...

Public Member Functions inherited from QObject
	QObject (QObject *parent)

virtual bool	event (QEvent *e)

virtual bool	eventFilter (QObject watched, QEvent event)

virtual const QMetaObject *	metaObject () const

QString	objectName () const

void	setObjectName (const QString &name)

bool	isWidgetType () const

bool	isWindowType () const

bool	signalsBlocked () const

bool	blockSignals (bool block)

QThread *	thread () const

void	moveToThread (QThread *targetThread)

int	startTimer (int interval, Qt::TimerType timerType)

int	startTimer (std::chrono::milliseconds time, Qt::TimerType timerType)

void	killTimer (int id)

T	findChild (const QString &name, Qt::FindChildOptions options) const

QList< T >	findChildren (const QString &name, Qt::FindChildOptions options) const

QList< T >	findChildren (const QRegExp &regExp, Qt::FindChildOptions options) const

QList< T >	findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const

const QObjectList &	children () const

void	setParent (QObject *parent)

void	installEventFilter (QObject *filterObj)

void	removeEventFilter (QObject *obj)

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *method, Qt::ConnectionType type) const

bool	disconnect (const char signal, const QObject receiver, const char *method) const

bool	disconnect (const QObject receiver, const char method) const

void	dumpObjectTree ()

void	dumpObjectInfo ()

void	dumpObjectTree () const

void	dumpObjectInfo () const

bool	setProperty (const char *name, const QVariant &value)

QVariant	property (const char *name) const

QList< QByteArray >	dynamicPropertyNames () const

void	destroyed (QObject *obj)

void	objectNameChanged (const QString &objectName)

QObject *	parent () const

bool	inherits (const char *className) const

void	deleteLater ()

Properties
QVariant	result
	The result for an input, if the dialog had any. More...

bool	autoDelete
	Specifies whether the object should delete itself after completition. More...

Properties inherited from QObject
	objectName

Additional Inherited Members
Static Public Member Functions inherited from QObject
QString	tr (const char sourceText, const char disambiguation, int n)

QString	trUtf8 (const char sourceText, const char disambiguation, int n)

QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject context, Functor functor, Qt::ConnectionType type)

bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char method)

bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method)

bool	disconnect (const QMetaObject::Connection &connection)

bool	disconnect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method)

Protected Member Functions inherited from QObject
QObject *	sender () const

int	senderSignalIndex () const

int	receivers (const char *signal) const

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)

virtual void	childEvent (QChildEvent *event)

virtual void	customEvent (QEvent *event)

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

Detailed Description

A result watcher to get the result once a dialog has finished.

This class is used to keep track of an active dialog an get the result once it has been completed. You should not create it yourself, is is returned from the core app.

See also: CoreApp::showDialog, MessageConfig

Definition at line 172 of file message.h.

Member Function Documentation

◆ complete() [1/2]

QtMvvm::MessageResult::complete ( QtMvvm::MessageConfig::StandardButton button )

Completes the dialog and tells the result that it is finished.

Parameters

button The button that was pressed by the user

Attention: This method should be used by the presenter only, not from the core

You must use this method from the GUI view code to mark a message result as completed as soon as the user completed the dialog. The button should be the button the user pressed, or MessageConfig::NoButton if close by another reason. The pressed button should be one that was in the list of buttons specified by the MessageConfig that created the dialog (with the NoButton beeing the only exception).

The method automatically emits the dialogDone() signal and handels self deletion in a threadsafe manner.

See also: MessageResult::dialogDone, MessageResult::result, MessageResult::autoDelete

◆ complete() [2/2]

QtMvvm::MessageResult::complete	(	QtMvvm::MessageConfig::StandardButton	button,
		const QVariant &	result
	)

inline

Completes the dialog and tells the result that it is finished.

Parameters

result	The input result to be set as MessageResult::result
button	The button that was pressed by the user

Attention: This method should be used by the presenter only, not from the core

You must use this method from the GUI view code to mark a message result as completed as soon as the user completed the dialog. The button should be the button the user pressed, or MessageConfig::NoButton if close by another reason. The pressed button should be one that was in the list of buttons specified by the MessageConfig that created the dialog (with the NoButton beeing the only exception).

The method automatically emits the dialogDone() signal and handels self deletion in a threadsafe manner.

See also: MessageResult::dialogDone, MessageResult::result, MessageResult::autoDelete

Definition at line 204 of file message.h.

◆ dialogDone

QtMvvm::MessageResult::dialogDone	(	QtMvvm::MessageConfig::StandardButton	button,
		QPrivateSignal
	)

signal

Is emitted as soon as the dialog was completed.

This is a private signal. It can be connect to as usual, but can only be emitted by the class it belongs to

Parameters

button The button that was pressed by the user to complete the dialog

Is emitted as soon as the dialog was closed with the button that was pressed, or MessageConfig::NoButton when closed another way. If the dialog had an input edit for the user to enter a value, you can retrieve the result via MessageResult::result.

Warning: You must always direct connect to this signal, because if the auto deletion is enabled, the result will be deleted right after the signal was emitted (and thus after all direct connected slots have been called). You may use MessageResult::result only in a slot connect to this signal, because auf the reason above, and because before the signal it is considered invalid.

See also: MessageResult::result, MessageResult::complete

◆ discardMessage

QtMvvm::MessageResult::discardMessage ( )

slot

Tries to discard the dialog by closing it.

Calls the closeMethod set by the presenter (if one was set) to close the dialog. Connect to the dialogDone() signal to be notified when the dialog was closed. It is typically emitted with MessageConfig::NoButton when beeing discarded this way.

See also: MessageResult::setCloseTarget, MessageResult::dialogDone

◆ setCloseTarget() [1/2]

QtMvvm::MessageResult::setCloseTarget	(	QObject *	closeObject,
		const QString &	closeMethod
	)

Sets an object and a method to be called to close the dialog.

Parameters

closeObject	The object to call the method on
closeMethod	The method to be called

Attention: This method should be used by the presenter only, not from the core

Use it from the presenter to register a view and a method on the view to be called to close the view. The closeMethod should be a paremeterless method signature (e.g. close()). Not settings a close target means that the dialog cannot be closed from code via discardMessage().

See also: MessageResult::discardMessage

◆ setCloseTarget() [2/2]

Q_INVOKABLE void QtMvvm::MessageResult::setCloseTarget	(	QObject *	closeObject,
		const QMetaMethod &	closeMethod
	)

Sets an object and a method to be called to close the dialog.

Parameters

closeObject	The object to call the method on
closeMethod	The method to be called

Attention: This method should be used by the presenter only, not from the core

Use it from the presenter to register a view and a method on the view to be called to close the view. The closeMethod should be a paremeterless method signature (e.g. close()). Not settings a close target means that the dialog cannot be closed from code via discardMessage().

See also: MessageResult::discardMessage

Property Documentation

◆ autoDelete

QtMvvm::MessageResult::autoDelete

readwrite

Specifies whether the object should delete itself after completition.

Default: true

If set to true, the message result will delete itself automatically right after dialogDone() has been emitted. This means it is still safe to access the result in the slots connected to dialogDone(), as long as they are direct connected.

Accessors
READ	autoDelete()
WRITE	setAutoDelete()
NOTIFY	autoDeleteChanged()

See also: MessageResult::complete, MessageResult::dialogDone

Definition at line 179 of file message.h.

◆ result

QtMvvm::MessageResult::result

readwrite

The result for an input, if the dialog had any.

Default: Invalid

If the dialog accepts some kind of input, the result is reported via this property. Please note that the property may be changed multiple times with invalid values while the dialog is still open. Only use the result after dialogDone() has been emitted.

Accessors
READ	result()
WRITE	setResult()

See also: MessageResult::hasResult, MessageResult::complete, MessageResult::dialogDone

Definition at line 177 of file message.h.

The documentation for this class was generated from the following files:

message.h
message.dox

Public Slots

Signals

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ complete() [1/2]

◆ complete() [2/2]

◆ dialogDone

◆ discardMessage

◆ setCloseTarget() [1/2]

◆ setCloseTarget() [2/2]

Property Documentation

◆ autoDelete

◆ result